Tukwila Boom Lift License

Tukwila Boom Lift License - Just fully qualified individuals should operate an aerial boom lift. Qualification could be obtained through a combination of sessions in the classroom and practical training with the particular kind of aerial lift that will be utilized on the job. A License is needed for any person who operates or works on an aerial boom lift.

Vehicle-mounted aerial devices comprise the following work vehicles: aerial ladders, extensible boom platforms, vertical towers, articulating boom platforms, and whatever combination of these types.

When using a boom lift, there are a few basic safety regulations that apply to all boom lifts. Safety of the worker is a main concern while they are working inside the basket. The worker should always put on a body harness and lanyard, attaching it to the basket or boom. Never tie off to a structure, equipment or an adjacent pole. Employees should stand on the basket floor, and never climb or sit on the edge of the basket. The manufacturer's load limits should be followed.

Aerial lift operators must be authorized to make use of the machinery. The operator needs to know all the aspects of the device and should have access to the manufacturers guidebook that must be kept in the lift. Operators are responsible for making certain that safety measures are followed in operating the lift. A daily test of lift controls should be carried out. Set brakes and position outriggers (if they are utilized) on pads or a stable surface. If working on a slope, make use of wheel chocks.

Never move an aerial lift truck with an elevated boom while personnel are in the basket. Articulating boom and extensible boom platforms made use of as employees carriers must have plainly marked, accessible, upper controls. Except in emergency cases, lower controls must not be utilized to override upper controls unless the person inside the lift gives authorization.

While working from an aerial lift, do not wear tree or pole climbers.
Do not alter the insulated part of the aerial lift.
Make certain that the booms are thoroughly checked, that the machinery is correctly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, ensure the lines are di-electrically tested based on local rules.

Click to Download the pdf