Pallet Stackers

Pallet stackers are a type of pallet jack that might be utilized to stack, transfer and lift commodities positioned on a pallet that are far too heavy for physical lifting. Primarily these mechanisms are employed to load and unload cargo from trucks and to transport pallets from one location to another within a stockroom of storage space. On the whole pallet jacks are built of heavy duty materials to hold up tremendous weights. Pallet stackers are sometimes identified as pallet jacks. They may be operated from a seated, upright or walk-behind position. Pallet jacks are divided into manual and powered styles.

Some basic components comprise the pallet jack. There are forks that slide beneath a pallet, capable of moving and raising it to a preferred height. The engine section or casing houses the gas-run, electronic or hydraulic gear that powers the machine.

Manual pallet jacks are hand-powered. They function hydraulically to make lifting burdensome pallets an easier job. Usually a walk-behind model meaning they are utilized by pulling and pushing the stacker to its desired location. Using a foot pedal or lever raises the stacker’s forks. Squeezing a lever or trigger returns the forks to the ground. These models of pallet stackers are ideal for lighter loads of up to approximately 1 ton or 907.18 kg.

Electric or gas powered pallet stackers can accommodate extreme lifting weights of up to 5 tons or 4535.92 kg. They are physically less demanding than the manual styles thanks to the mechanized power to raise and lower the stacker’s forks. These versions are steered by turning the handle in a particular direction. There is a button on the knob that operates to hoist and lower the forks. A throttle set up on the stacker’s grips moves the machine forward and in reverse. This variety of equipment is generally known as a forklift and is used from a sit-down posture.

Picking the right model of pallet jack can be somewhat important as designs will have varying lift capabilities, along with varying fork widths. Some types of stackers might only permit two pallets to be loaded at one time, whilst other versions might be able to stack many pallets. Some versions of these lift trucks include an changeable fork in order to allow the stacker to slide underneath pallets of atypical sizes and shapes. Multiple fork models might be fairly effective when different types of pallets are being used in the same warehouse.

Click to Download the pdf